Kyle Larson 2026 Talladega YellaWood 500 Winner Collectible Figure

Talladega is the kind of track where a race can change in seconds.

Kyle Larson’s 2026 YellaWood 500 win proved exactly that.

With half a lap remaining in overtime, Larson had dropped deep into the pack.

By the time the field reached the finish line, he was first.

NASCAR reported that Larson emerged from 11th place in the final two turns and crossed the line only 0.041 seconds ahead of Hendrick Motorsports teammate William Byron. The victory on October 25, 2026 was Larson’s first NASCAR Cup Series win at Talladega Superspeedway.

That is the moment this collectible is built around.

The Talladega Win Behind This Keepsake

Kyle Larson 2026 Talladega YellaWood 500 Winner Funko Pop - figure with box and trophy

Larson did not simply lead the closing laps and cruise to the flag.

The final sequence was chaotic even by Talladega standards.

NASCAR described him as falling backward late in overtime before making a remarkable recovery through the final corners. He went from 11th to first and beat Byron by less than five hundredths of a second.

That makes the winner theme much more meaningful than a generic No. 5 driver figure.

The raised fists, trophy, and race-car imagery represent a specific comeback and a first-time Talladega victory.

Why This Kyle Larson Talladega Figure Stands Out

• Commemorates a verified race win: Larson won the YellaWood 500 at Talladega on October 25, 2026.
• Captures an unusually dramatic finish: NASCAR reported his late charge from 11th to first through the final two turns of overtime.
• Marks Larson’s first Cup win at Talladega: The victory ended a long winless run for him at the track.
• Keeps the No. 5 identity clear: Blue, white, and red HendrickCars.com-inspired racing colors make the driver connection immediately recognizable.
• Fits compact racing displays: At approximately 10 cm tall, the resin figure can sit beside die-cast cars, tickets, caps, cards, or other NASCAR memorabilia.

Kyle Larson 2026 Talladega YellaWood 500 Winner Funko Pop - photo 2

Why the Final Lap Became the Story

Larson had been competitive throughout the race.

He finished fourth in Stage 1, second to Joey Logano in Stage 2, and remained in contention through a day that eliminated or delayed many other championship contenders.

But the finish is what people will remember.

Talladega often rewards timing, drafting help, and the ability to react instantly when lanes develop.

Larson appeared to have lost his chance late in overtime.

Then the pack shifted.

A route opened.

And the No. 5 Chevrolet came back through the field.

NASCAR recorded the final margin at 0.041 seconds.

From 11th to Victory Lane

The phrase “11th to first” gives this product a stronger story than simply calling it a race-winner figure.

It explains why the victory felt improbable.

It also makes the celebratory pose more meaningful.

The raised fists are not just generic winner imagery.

They represent a finish that seemed to disappear and then came back in the final seconds.

Design and Display Character

The supplied figure uses a stylized oversized-head collectible format with a compact victory-lane scene.

Visible details include:

• blue, white, and red No. 5 racing attire
• HendrickCars.com-inspired graphics
• both fists raised in celebration
• blue cap
• winner’s trophy
• No. 5 race car
• flat display base
• race-specific presentation artwork

The overall composition is designed to read immediately as a victory collectible rather than a neutral driver portrait.

Product Specifications

Detail	Information
Product type	Stylized collectible figure
Driver inspiration	Kyle Larson
Team theme	Hendrick Motorsports / No. 5
Race	YellaWood 500
Track	Talladega Superspeedway
Date	October 25, 2026
Result	Race winner
Final margin	0.041 seconds
Finish story	From 11th to first through the final two turns of overtime
Height	Approximately 10 cm
Material	3D-printed resin
Printing process	SLA/LCD resin printing
Finish	Hand-finished
Base	Flat display base
Intended use	Shelf, desk, cabinet, racing memorabilia display

A First Talladega Win

Larson entered the weekend without a Cup Series victory at Talladega.

NASCAR noted his previous 0-for-23 career record at the track before the October 25 race.

That gives the win another layer of meaning.

Talladega had historically been one of the places where his results had not matched his success elsewhere.

This time, nearly everything came together.

He avoided the major incidents.

He remained near the front.

He collected stage points.

And when the last-lap opportunity appeared, he took it.

For longtime Larson fans, that makes the collectible about more than one trophy.

It marks the day Talladega finally became part of his Cup win list.

Victory-Lane Details Matter

A generic driver figure can represent any season.

This product tries to narrow the story to one race.

The supplied artwork uses:

• a celebratory pose,
• race-car reference,
• trophy imagery,
• and Talladega YellaWood 500 presentation graphics.

Those details help turn the figure into a race-specific keepsake.

The more faithfully the finished product matches the actual No. 5 race-day colors and winner presentation, the stronger that connection becomes.

Resin Construction

The supplied specifications identify the figure as:

• 3D-printed resin
• produced using SLA/LCD printing
• approximately 10 cm tall
• and hand-finished

That makes it different from a conventional mass-produced vinyl figure.

Resin is rigid and is better suited to display than rough handling.

If genuinely hand-finished, small variations in paint placement or surface detail may occur between pieces.

Those variations should not automatically be described as defects, but they should not be marketed as one-of-one characteristics unless that is specifically guaranteed.

Better for Display Than Play

Handle the figure by the base or larger body sections where possible.

Be careful around:

• raised fists,
• trophy,
• cap,
• race-car elements,
• and other smaller projecting details.

The flat base is intended for shelf presentation, but it should still be placed on a stable, level surface.

Where It Fits in a NASCAR Collection

This figure can work well beside:

• No. 5 die-cast cars
• Kyle Larson trading cards
• race tickets
• Hendrick Motorsports memorabilia
• signed photos
• Talladega souvenirs
• winner hats
• or other race-specific figures

It may be particularly appealing to collectors who organize displays by important wins rather than simply by driver.

A Gift With a Specific Race Story

This collectible can be especially meaningful for:

• Kyle Larson fans
• Hendrick Motorsports supporters
• Talladega race attendees
• NASCAR history collectors
• No. 5 die-cast collectors
• birthdays
• holiday gifts
• or someone who watched the overtime finish live

The race-specific context makes it more personal than a general Larson figure.

Care Tips

Dust the figure with a soft, dry cloth or gentle detailing brush.

Use light pressure around the fists, trophy, car, and other raised details.

Keep it indoors on a stable, dry surface.

Avoid:

• prolonged direct sunlight
• moisture
• solvents
• abrasive cleaners
• rough handling
• or high heat

If the presentation box is retained, keep it away from crushing pressure and damp storage areas.

Questions About This Kyle Larson Figure

Did Kyle Larson really win at Talladega on October 25, 2026?

Yes.

NASCAR lists Kyle Larson as the winner of the 2026 YellaWood 500 at Talladega Superspeedway on October 25, 2026.

Did he really go from 11th to first?

Yes.

NASCAR reported that Larson emerged from 11th place through the final two turns of the overtime finish and reached the line first.

How close was the finish?

Larson beat William Byron by 0.041 seconds.

Was this Larson’s first Talladega Cup Series win?

Yes.

NASCAR described it as his first NASCAR Cup Series victory at Talladega Superspeedway.

How large is the figure?

The supplied product specification lists it at approximately 10 cm tall.

Is it made from resin?

Yes.

The supplied description identifies it as SLA/LCD 3D-printed resin with hand finishing.

Is this an official Funko Pop?

That cannot be confirmed from the supplied product information.

Because the figure is described as 3D-printed resin, it should not automatically be represented as an authentic Funko Pop unless the supplier can verify official Funko production, licensing, item number, packaging, and product origin.

A safer title is:

Kyle Larson 2026 Talladega YellaWood 500 Winner Collectible Figure

Is the No. 5 race-car design historically accurate to the winning car?

The supplied artwork clearly uses a No. 5 HendrickCars.com-inspired theme, but the exact paint scheme and sponsor placement should be checked against the actual October 25 race car before promising a race-perfect reproduction.